National Item Identification Number
00-340-2863
003402863
5305-00-340-2863
5305003402863
National Stock Number
Item Name
SCREW,CLOSE TOLERANCE
Federal Supply Class
5305
Description
A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion is of specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a specific diameter for items (1.000 IN.) (25 mm) or less in diameter. Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001 IN.) (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the Screw Thread Standards, FED STD H28 and/or other nationally recognized standards. The head is designed to be held or driven with an inserted driver. It is not designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads.
Commercial and Government Entity Code (Supplier Data)
17446
73197
80539
92215
98897
17446
Reference Numbers (Part Numbers)
LS15234C4-4
LS15234C4-4
LS15234C4-4
LS15234C4-4
LS15234C4-4
LS5234C4-4
Required Categories
THREAD CLASS
THREAD LENGTH
FASTENER LENGTH
MINIMUM TENSILE STRENGTH
HEAD HEI
Required Description
3A
0.291 INCHES MINIMUM AND
0.341 INCHES MAXIMUM
0.551 INCHES MINIMUM AND
0.
